ALL-IN-ONE Biwak -30°C

Details

The patented Polarmond all-in-one bivouac is the weight-optimised version of the expedition assortment line and unites the conventional functions of tent, sleeping bag, vapour barrier liner and thermal mat in one product.

It is designed for:

1 person
4 seasons: Temperature range from -30°C to +25°C
Constantly warm sleeping temperature under the liner
Short trips
Convertible to an all-in-one tent
It contains the following modules/accessories:
Bivouac module, single-walled, with rods
Outer shell with rods (sleeping area is vapour-impermeable)
Liner
Thermal mat (technology: Therm-A-Rest, NeoAir XTherm)
Y-peg 18 cm, 1 set à 12 pieces

Bivouac Module:

Materials: 100 % polyamide (eVent® membrane). Water column: 20000 mm
Floor materials: 100 % polyamide (70D rip stop nylon with polyurethane coating). Water column: 10000 mm
Rod materials: Aluminium A7001 T6, 9 mm
Single-walled design
Wind-proof, water-proof, breathable
1 air vent
Colour: Yellow, Pantone 122 C

Outer Shell:

Outer materials (leg area): 100 % polyamide (40D rip stop nylon: Interior with polyurethane coating and exterior with silicone coating). Water column: 3000 mm
Outer materials (chest area): 100 % polyamide (rip stop nylon with polyurethane membrane). Water column: 20000 mm.
Floor materials: 100 % polyamide (70D rip stop nylon: Interior with polyurethane coating). Water column: 10000 mm
Sleeping area wall materials: 100 % polyamide (40D rip stop nylon with polyurethane coating). Vapour-impermeable.
Sleeping area floor materials: 100 % polyamide (40D rip stop nylon). Vapour-impermeable.
Insulating materials: Continuous synthetic fibres (hollow fibres)
Rod materials: Aluminium A7001 T6, 9 mm
Ergonomically-shaped hood with drawstring
2 inner pockets with Velcro clasp
Colour: Orange, Pantone 2018 C (exterior)
Colour: Yellow, Pantone 122 C (sleeping area)

Liner:

Hybrid consisting of a blanket and a foot bag, expandable to a bag
Vapour-permeable
Outer materials: 100 % polyamide (nylon)
Insulating materials: Continuous synthetic fibres (hollow fibres)
DWR impregnation (water-repellent)
PFC-free
Colour: Red, Pantone 185 C

Thermal Mat:

Therm-A-Rest, NeoAir XTherm
Upper and lower side materials: 100 % polyester (75D polyester: Interior with aluminium coating)
ThermaCapture™, reflects heat radiation
Triangular Core Matrix™, prevents air circulation
R-value: 5.7 (thermal resistance)
Maximum width: 74 cm
Length: 200 cm
Thickness: 6.3 cm

WEIGHT & PACK DIMENSIONS

	SMALL	REGULAR	LARGE
	Gewicht Packmass	Gewicht Packmass	Gewicht Packmass
Bivouac Module	0.61 kg Ø 13 x 25 cm	0.61 kg Ø 13 x 25 cm	0.61 kg Ø 13 x 25 cm
Outer Shell	2.62 kg Ø 27 x 33 cm	2.72 kg Ø 27 x 35 cm	2.82 kg Ø 27 x 37 cm
Liner	0.72 kg Ø 18 x 25 cm	0.77 kg Ø 18 x 25 cm	0.82 kg Ø 18 x 25 cm
Sleeping Pad	0.75 kg Ø 16 x 25 cm	0.80 kg Ø 16 x 25 cm	0.85 kg Ø 16 x 25 cm
Total	4.70 kg	4.90 kg	5.10 kg

The data displayed above refer to the net weight without pegs.

Technical data: We reserve the right to make changes

MANUAL

SAFETY / MAINTENANCE

BIVOUAC MODULE:

The fabrics of the bivouac module have been tested and certified in accordance with Flame Protection Norm CPAI84-1995. Nevertheless, it is not recommended to place heat sources near the tent or inside the tent or to ignite an open fire. The risks of suffocation and/or burns are possible!
It must be ensured that there is always sufficient fresh air in the tent’s interior. The risk of suffocation is possible!
Carefully choose the location for setting up the tent. Rough/jagged ground should be avoided in order to prevent damage to the equipment. Dangerous areas must be avoided: Falling rocks/branches, lightning, floods, avalanches, strong winds and additional potential risks can seriously injure the tent’s occupants!

SLEEPING SHELL:

The outer fabrics of the sleeping shell–with the exception of the entry area–have been tested and certified in accordance with Flame Protection Norm CPAI84-1995. Nevertheless, it is not recommended to place heat sources near the sleeping shell or to ignite an open fire. Burns are possible!
The interior fabrics of the sleeping shell and those of the entry area are not fire-proof. Heat sources or open fires near or inside the sleeping shell are forbidden. The risks of suffocation and/or burns are possible!
One’s head must be kept outside the sleeping shell at all times. The risk of suffocation is possible!
Carefully choose the location for setting up the sleeping shell. Rough/jagged ground must be avoided in order to prevent damage to equipment. Dangerous areas must be avoided: Falling rocks/branches, lightning, floods, avalanches, strong winds and additional potential risks can seriously injure the sleeping shell’s occupants!
Flawless functioning can be ensured only in combination with a suitable thermal mat and liner from POLARMOND!

LINER:

The fabrics of the liner are not fire-proof. Contact with heat sources or open fires must be avoided. Burns are possible!

TENT:

DO NOT WASH
DO NOT BLEACH
DRYING IN THE TUMBLER NOT POSSIBLE
DO NOT IRON
NO CHEMICAL CLEANING POSSIBLE

Clean soiled areas with a soft sponge/rag and warm water by hand
Dry the wet/damp tent in the open air after use or after cleaning as well as before packing
Zippers should be brushed to remove soil/sand particles

OUTER SHELL:

DO NOT WASH
DO NOT BLEACH
DRYING IN THE TUMBLER NOT POSSIBLE
DO NOT IRON
NO CHEMICAL CLEANING POSSIBLE

Cleaning soiled areas with a soft sponge/rag and warm water by hand
Dry the wet/damp sleeping shell in the open air after use or after cleaning as well as before packing
Zippers should be brushed to remove soil/sand particles

LINER: